Deep Well Pump Model EQS

Overview

Whether in well systems or general water supply. EQS multi-submersible borehole pumps provide maximum reliability and save energy costs. EQS submersible borehole can be alternative with EQJ.

EQS multi-submersible borehole pumps stand for high operating reliability and low energy costs. EQS multi-submersible borehole pumps are suitable for well diameters from 100mm (4”). They can be installed either vertically in narrow deep wells or in horizontal position.

 

 Feature                                                                                    

High-grade materials
our manufactures its well pumps and motors from stainless steel. A combination of deep drawing and investment casting gives the pumps a particularly smooth finish and highly precise geometries. This results in a continuously high efficiency of the maintenance-free EQS submersible borehole pump.

 

 Benefits                                                                                        
EQS submersible borehole pumps stand for reliable system operation and a long service life.

This is why the well pumps are so reliable:
Reinforced suction strainers
Sturdy drive lanterns/motor stools
Integrated check valves
Laser-welded impellers
Protection against thrust reversal

 

 Low Operating Costs                                                                          
We supplies maintenance-free well pumps with perfectly matched motors. This dramatically reduces energy costs. The low-loss check valve also contributes to long-term savings.

 

Easy to Operate and Flexible                                                                   
The maintenance-free submersible borehole pump is available for a variety of riser pipe connections. The check valve is easy to dismantle. The motors come with a NEMA connection.

we also has the answer to handling aggressive fluids: For the toughest requirements the submersible borehole pump is available in even higher grade CrNiMo steel.

 

Applications:                                                                                    

Handling clean or slightly contaminated water 

Irrigation and drainage, spray irrigation 

Industrial and municipal water supply

Groundwater drawdown and management 

Raw and service water supply 

Pressure boosting 

Drinking water supply (EQS)

Borehole water supply

Fire fighting

Light chemical industry

Marine applications

 

 

 

 

 

 

 

Video

Vertical In-Line OH5

Overview

Vertical In-Line Pump ESG

The ESG inline pump article provides guidance and review about different types, qualities, durabilities, and prices. In this pump type, the suction and discharge connections are kept in a straight line or inline with each other inside of the casing.

ESG In-line pumps are centrifugal type pumps, and flow of fluid does not change inside the inline pumps. Mostly, the inline pumps are used for the water heating and circulation systems. They operate with water as the fluid medium and are called as the inline water pump.

These pumps are smaller and require very less floor space. In-line pumps are not self-priming type pumps. They pump fluids with less or no solid particles mixed in them. They are used in the boiler, cooling tower, air conditioning systems, and as booster pumps in the water supply system.

Due to their inline flow, they are easier to install. They can be installed like valves in pipelines. Inline pumps are commonly used as booster pumps in thermal power stations

ESG Type inline Pump are  API OH5 type ,single stage, close-coupled pump, which meets the standard ISO5199 and peformance meeting ISO2858 pump . IEC and options NEMA motor is coupled together through the sleeve or coupling clutch. The pump and motor can also share the same shaft. So ESG type close-coupled pump is not necessary to verify the coaxial state and easy to maintenance. The pump and the motor is fixed directly together through coupling bracket, then the completely set installed on the common base frame.

Feature                                                                                     

  • High Efficiencies and reduced energy consumption, 3D design used in the whole design process and CFD analysis and being embodied with knowledge and experience of the fluid experts in EU-Flo Pump.
  • Modular design reduce the number of sizes of the spare parts to allow manage the spare parts easily.
  • Reliable, Simplified and heavy-duty bearing unit with variety of difference lubrication, Standard bearing  is Grease lubrication ,but oil lubrication is also possible.
  • Optional shaft sealing for single mechanical seal, double mechanical seal, cartridge mechanical seal
  • Optional stuffing box cooled by fan.

Benefits                                                                                    

  • Simple structure to save your maintenance cost and project budget.
  • Fully range of selection chart for you variable design requirement
  • Improved efficiency. excellent performance and superior quality
  • Many choices for material, Ductile Iron ,cast steel, all stainless steel and duplex stainless steel, bronze for your different application.
  • Quick and easy installation, safe operation, easy maintenance and service
  • Long lifetime and easy maintenance.
  • Pump and motor joint by coupling , options for IEC and NEMA motor installation,
  • Standard is Close impeller ,Options semi open impeller and open impeller for solid contained.

Applications                                                                               

  • General Industries of chemical process for hot oil and hot liquids, crude oil.
  • Food & beverage
  • Sewage Treatment Plant
  • Biofuels
  • Fertilizers
  • Desalination
  • Petrochemical processing
  • Clear and lightly contaminated liquids
  • Viscous liquids
  • Water circulation and HVAC

Operation Range                                                                           

  • Capacity:

up to 666L/s (2400m3h), if you need special performance, EU-Flo Pump can offer tailor-made pumps for your application

  • Head:

up to 150m(492ft), if you need special performance, we can offer tailor-made pumps for your application

  • Working temperature:

up to 120°C

  • Design pressure:

up to 2.5Mpa.

  • Dis Flange:

up to 500mm or tailor design. Flange standard can be DIN, ANSI, AS,JIS and GOST or other standard

Submersible Pump ECDK

Overview

ECDK  Multistage Bottom Suction Submersible Pump                                        

The ECDK are virtually silent multistage pumps that can be used as submersibles in rainwater harvesting systems and wells, and also surface, or “dry”, mounted in unventilated areas and/or rooms liable to flooding or affected with moisture. Construction and performance are the same as the Acuatec submersible pumps, but here the hydraulic assembly is positioned under the motor which is cooled by the liquid being pumped.  The pump casing has pre-drilled fixing holes. They are suitable for pumping clean and potable water (up to 35°C) and water containing up to 60 g/m³ of suspended solids, The pump is also fully cooled by the pumped liquid, avoiding the need for fans.

 

The ECDK easy-to-install high-head multistage submersible pump is designed for turf irrigation service, high head dewatering applications, and high pressure, low gallonage water feature projects that require high head and low flow (i.e., fountains).

  • Stainless steel components outside and inside – non-corrosive, built to industrial specifications
  • Self-cooling, quiet operation – the pumped liquid cools the motor for long life
  • Easy installation – no control box required to start the pump

Features and Benefits                                                                    

  • Non-corrosive – All hydraulic parts, including impellers and hydraulic bowl chambers, are made from high-grade stainless steel.
  • Superior “Draw-Down” Capability – With the lowest draw down in its class, our 4-1/2 in. capability dwarfs the competition.
  • Reduced Amp Draw – Offering over 25% less energy consumption reduces operating costs and extends the service life.
  • Cooler and Quieter Operation – Using the pumped liquid to cool the motor, the water passing over the motor dampens the noise. No need for expensive “flow-inducer sleeves” required on other pumps.

Specifications                                                                             

  • Stainless Steel Shell – Heavy walled and corrosion resistant
  • Stainless Steel Shaft – OFfers generous impeller drive surfaces.
  • Nylatron Shaft Bearing – Exclusive self-lubricating bearing resists sand and abrasives.
  • Precision Molded Impellers – Pefectly balanced and ultra smooth for the highest performance and efficiency. Allows for .080″ solids.
  • Submersible depth up to 20m.
  • Liquid temperature up to40°C.
  • Ambient temperature up to +40°C.
  • Max sand content 150g/m3
  • 2 pole induction motor,
  • Single-phase/three-phase:220/380V/460V, 50Hz/60Hz.
  • Built-in overload motor protection.
  • Insulation: Class B
  • Protection: IP X8.
  • Built-in capacitor.
  • Outlet diameter： 1.25″,
  • External pump body: Stainless Steel
  • Suction strainer: Stainless Steel.
  • Impeller and diffusers: Stainless steel/PPO.
  • Bearing Bracket: Cast  Iron.
  • Shaft: Stainless Steel
  • Shaft with rotor: Stainless steel’.
  • Motor housing: Stainless Steel.
  • Michanical seal： Ceramic-Graphite

Applications                                                                               

  • Recommended for: irrigation, shallow wells, rain collection tanks, grey water Other uses: dewatering, fountains, pressure boosting domestic water
  • Centrifugal Submersible Multistage water pump for clear drainage.
  • Particularly suitable for irrigation system, drinkable water supplying etc

 

 

 

 

 

 

 

Chemical Process Pump EZA(OH1)

Overview

 

Chemical Process OH1

ZA/EZE(foot-mounted ,centerline-mounted)                                             

EZA/EZE is API 610 OH1 and OH2 ,single stage, end suction pump with back-pull-out structure ,the pump that is completely designed according to API610 8th and VDMA24297,  which meets the standard of ISO5199& ASME 73.1. to ensure the dimensional interchangeability with other pumps. EZA/EZE  type end suction pump is EU-Flo major pumps for application of single stage end suction pump. The EZA/EZE end suction pumps are usually applied for chemical process industries, oil or liquid with less solids or solids. After being Equiped with EU-Flo optional skit, EZA/EZE also used for hot oil and light corrosive liquid and sea water.EZA/EZE type end suction pump usually has closed impeller, the semi-open and open impeller of vortex can be supplied as well .

The foot-mounted and centerline-mounted structure :                                     

Impeller Classification                                                                      

Features                                                                                   

  • Meet all API 610 requirements for temperatures below 150⁰C(EZA) or 450⁰C(EZE).
  • End-top nozzle design
  • Single or double volute depending on size to reduce radial forces
  • Back pull-out assembly and easy maintenance without disturbing the driver, coupling hubs or casing…
  • Inducer design and many other options available
  • High Efficiencies and reduced energy consumption, 3D design used in the whole design process and CFD analysis and being embodied with knowledge and experience of the fluid experts in EU-Flo Pump.
  • Exceeds standard requirements of ASME B73.1 standard
  • Modular design reduce the number of sizes of the spare parts to allow manage the spare parts easily.
  • Standard bearing lubrication is oil, the Grease lubrication is also possible.
  • Optional shaft sealing for single seal mechanical seal, double mechanical seal, cartridge mechanical seal, Seal area meet API 682

 

  • Optional stuffing box cooled by third coolant, bearing bracket with cooling jacket or finned shape to allow the pump to transfer your very hot liquid. suitable for the most demanding industrial applications
  • Quick and easy installation, safe operation, easy maintenance and service
  • Versatile,reliable, high efficiency hydraulic and material options
  • All metallurgies available

Benefits                                                                                   

  • Simple structure to save your maintenance cost and project budget.
  • large-scale production to ensure economic cost and easy spare parts supply.
  • Improved efficiency.
  • Many choices for material, cast steel, all stainless steel and duplex stainless steel, bronze for your different application.
  • Wind performance range and optional tailor-made design service to allow you to have a reasonable project design in EU- Pump’s end suction pumps.
  • Excellent pumps with shortly delivery.
  • Long lifetime and easy maintenance of Back pull-out assembly without disturbing the driver, coupling and pipeline

Applications                                                                                

  • General Industries of chemical process for hot oil and hot liquids, crude oil.
  • Food & beverage
  • Sewage Treatment Plant
  • Pumping and mixing solutions for pulp and paper main processing
  • Biofuels
  • Fertilizers
  • Desalination
  • Petrochemical processing
  • Clear and lightly contaminated liquids
  • Viscous liquids
  • Fibrous slurries
  • Large solids containing liquids

Operation Range                                                                                

  • Capacity:

up to 722L/s (2600m3h), if you need special performance, EU-Pump can offer tailor-made pumps for your application

  • Head:

up to 300m(984ft), if you need special performance, we can offer tailor-made pumps for your application

  • Temperature:

up to 425°C, the declaration should be cleared before the project inquiry if the temperature >80°C

  • Working Pressure:

1.0Mpat /1.6Mpa / 2.5Mpa /3.0Mpa,upto 5.0Mpa which depends on the application.

  • DNs(Suc),

up to 400mm or tailor design. Flange standard can be DIN,AS,ANSI,JIS,GOST or other standard..

ZA/EZE(foot-mounted ,centerline-mounted)                                             

EZA/EZE is API 610 OH1 and OH2 ,single stage, end suction pump with back-pull-out structure ,the pump that is completely designed according to API610 8th and VDMA24297,  which meets the standard of ISO5199& ASME 73.1. to ensure the dimensional interchangeability with other pumps. EZA/EZE  type end suction pump is EU-Flo major pumps for application of single stage end suction pump. The EZA/EZE end suction pumps are usually applied for chemical process industries, oil or liquid with less solids or solids. After being Equiped with EU-Flo optional skit, EZA/EZE also used for hot oil and light corrosive liquid and sea water.EZA/EZE type end suction pump usually has closed impeller, the semi-open and open impeller of vortex can be supplied as well .

The foot-mounted and centerline-mounted structure :                                     

Impeller Classification                                                                      

Features                                                                                   

  • Meet all API 610 requirements for temperatures below 150⁰C(EZA) or 450⁰C(EZE).
  • End-top nozzle design
  • Single or double volute depending on size to reduce radial forces
  • Back pull-out assembly and easy maintenance without disturbing the driver, coupling hubs or casing…
  • Inducer design and many other options available
  • High Efficiencies and reduced energy consumption, 3D design used in the whole design process and CFD analysis and being embodied with knowledge and experience of the fluid experts in EU-Flo Pump.
  • Exceeds standard requirements of ASME B73.1 standard
  • Modular design reduce the number of sizes of the spare parts to allow manage the spare parts easily.
  • Standard bearing lubrication is oil, the Grease lubrication is also possible.
  • Optional shaft sealing for single seal mechanical seal, double mechanical seal, cartridge mechanical seal, Seal area meet API 682

 

  • Optional stuffing box cooled by third coolant, bearing bracket with cooling jacket or finned shape to allow the pump to transfer your very hot liquid. suitable for the most demanding industrial applications
  • Quick and easy installation, safe operation, easy maintenance and service
  • Versatile,reliable, high efficiency hydraulic and material options
  • All metallurgies available

Benefits                                                                                   

  • Simple structure to save your maintenance cost and project budget.
  • large-scale production to ensure economic cost and easy spare parts supply.
  • Improved efficiency.
  • Many choices for material, cast steel, all stainless steel and duplex stainless steel, bronze for your different application.
  • Wind performance range and optional tailor-made design service to allow you to have a reasonable project design in EU- Pump’s end suction pumps.
  • Excellent pumps with shortly delivery.
  • Long lifetime and easy maintenance of Back pull-out assembly without disturbing the driver, coupling and pipeline

Applications                                                                                

  • General Industries of chemical process for hot oil and hot liquids, crude oil.
  • Food & beverage
  • Sewage Treatment Plant
  • Pumping and mixing solutions for pulp and paper main processing
  • Biofuels
  • Fertilizers
  • Desalination
  • Petrochemical processing
  • Clear and lightly contaminated liquids
  • Viscous liquids
  • Fibrous slurries
  • Large solids containing liquids

Operation Range                                                                                

  • Capacity:

up to 722L/s (2600m3h), if you need special performance, EU-Pump can offer tailor-made pumps for your application

  • Head:

up to 300m(984ft), if you need special performance, we can offer tailor-made pumps for your application

  • Temperature:

up to 425°C, the declaration should be cleared before the project inquiry if the temperature >80°C

  • Working Pressure:

1.0Mpat /1.6Mpa / 2.5Mpa /3.0Mpa,upto 5.0Mpa which depends on the application.

  • DNs(Suc),

up to 400mm or tailor design. Flange standard can be DIN,AS,ANSI,JIS,GOST or other standard..

Multistage Submersible Pump Serial EQJ

Overview

Whether in well systems or general water supply. EQJ submersible borehole pumps provide maximum reliability and save energy costs.

EQJ submersible borehole pumps stand for high operating reliability and low energy costs. EQJ submersible borehole pumps are suitable for well diameters from 100mm (4”). They can be installed either vertically in narrow deep wells or in horizontal position.

 Feature                                                                                     

High-grade materials
our manufactures its well pumps and motors from stainless steel. A combination of deep drawing and investment casting gives the pumps a particularly smooth finish and highly precise geometries. This results in a continuously high efficiency of the maintenance-free EQJ submersible borehole pump.

 Benefits                                                                                        
EQJ submersible borehole pumps stand for reliable system operation and a long service life.

This is why the well pumps are so reliable:
Reinforced suction strainers
Sturdy drive lanterns/motor stools
Integrated check valves
Laser-welded impellers
Protection against thrust reversal

 Low operating costs                                                                          
We supplies maintenance-free well pumps with perfectly matched motors. This dramatically reduces energy costs. The low-loss check valve also contributes to long-term savings.

Easy to operate and flexible                                                                    
The maintenance-free submersible borehole pump is available for a variety of riser pipe connections. The check valve is easy to dismantle. The motors come with a NEMA connection.

we also has the answer to handling aggressive fluids: For the toughest requirements the submersible borehole pump is available in even higher grade CrNiMo steel.

Applications:                                                                                 

Handling clean or slightly contaminated water 

Irrigation and drainage, spray irrigation 

Industrial and municipal water supply

Groundwater drawdown and management 

Raw and service water supply 

Pressure boosting 

Drinking water supply (EQJS)

Borehole water supply

Fire fighting

Light chemical industry

Marine applications

 

 

 

 

 

 

 

Chemical Process Pump EZE(OH2)

Overview

ZA/EZE(foot-mounted ,centerline-mounted)         

Eu-flo Pump’s EZE horizontal end-suction pump, the OH2, is specifically designed to meet the needs of the hydrocarbon processing industry.

The API EZE OH2 is designed for optimum reliability, featuring rugged construction and state-of-the-art mechanical design. Units are well suited for applications that include petroleum refining/production/distribution, petrochemical/ chemical processing, boiler circulation/high temperature applications, and general industrial use. A workhorse in the industry, these pumps are designed for years of service, in some of the toughest environments imaginable.

This model is fully compliant with latest edition API 610 specifications. Standard features include renewable casing wear rings, API 610 seal chamber sized to accommodate 682 mechanical seals, back pull-out construction, dynamically-balanced impellers, heavy-duty carbon steel/finned bearing housing equipped with labyrinth-type oil seals, and fan cooling. Locations are also included for temperature probes, as standard. Common options include single, double or Cartridge mechanical seals, and various seal flush systems. Heavy-duty baseplates, casing jackets, and various levels of performance testing are also available.

Together, these features combine to produce some of the most efficient hydraulics in the industry and shaft deflection values meeting or exceeding those of API 610 requirements. The API Maxum OH2 is also available as an OH1 design for lower temperature applications.

Both EZA/EZE is API 610 OH1 and OH2 ,single stage, end suction pump with back-pull-out structure ,the pump that is completely designed according to API610 11th and VDMA24297,  which meets the standard of ISO5199& ASME 73.1. to ensure the dimensional interchangeability with other pumps. EZA/EZE  type end suction pump is EU-Flo major pumps for application of single stage end suction pump. The EZA/EZE end suction pumps are usually applied for chemical process industries, oil or liquid with less solids or solids. After being Equiped with EU-Flo optional skit, EZA/EZE also used for hot oil and light corrosive liquid and sea water.EZA/EZE type end suction pump usually has closed impeller, the semi-open and open impeller of vortex can be supplied as well .

The foot-mounted and centerline-mounted structure :                                     

Impeller Classification                                                                      

Features                                                                                   

  • Meet all API 610 requirements for temperatures below 150⁰C(EZA) or 450⁰C(EZE).
  • End-top nozzle design
  • Single or double volute depending on size to reduce radial forces
  • Back pull-out assembly and easy maintenance without disturbing the driver, coupling hubs or casing…
  • Inducer design and many other options available
  • High Efficiencies and reduced energy consumption, 3D design used in the whole design process and CFD analysis and being embodied with knowledge and experience of the fluid experts in EU-Flo Pump.
  • Exceeds standard requirements of ASME B73.1 standard
  • Modular design reduce the number of sizes of the spare parts to allow manage the spare parts easily.
  • Standard bearing lubrication is oil, the Grease lubrication is also possible.
  • Optional shaft sealing for single seal mechanical seal, double mechanical seal, cartridge mechanical seal, Seal area meet API 682

 

  • Optional stuffing box cooled by third coolant, bearing bracket with cooling jacket or finned shape to allow the pump to transfer your very hot liquid. suitable for the most demanding industrial applications
  • Quick and easy installation, safe operation, easy maintenance and service
  • Versatile,reliable, high efficiency hydraulic and material options
  • All metallurgies available

Benefits                                                                                   

  • Simple structure to save your maintenance cost and project budget.
  • large-scale production to ensure economic cost and easy spare parts supply.
  • Improved efficiency.
  • Many choices for material, cast steel, all stainless steel and duplex stainless steel, bronze for your different application.
  • Wind performance range and optional tailor-made design service to allow you to have a reasonable project design in EU- Pump’s end suction pumps.
  • Excellent pumps with shortly delivery.
  • Long lifetime and easy maintenance of Back pull-out assembly without disturbing the driver, coupling and pipeline

Applications                                                                                

  • General Industries of chemical process for hot oil and hot liquids, crude oil.
  • Food & beverage
  • Sewage Treatment Plant
  • Pumping and mixing solutions for pulp and paper main processing
  • Biofuels
  • Fertilizers
  • Desalination
  • Petrochemical processing
  • Clear and lightly contaminated liquids
  • Viscous liquids
  • Fibrous slurries
  • Large solids containing liquids

Operation Range                                                                                

  • Capacity:

up to 722L/s (2600m3h), if you need special performance, EU-Pump can offer tailor-made pumps for your application

  • Head:

up to 300m(984ft), if you need special performance, we can offer tailor-made pumps for your application

  • Temperature:

up to 425°C, the declaration should be cleared before the project inquiry if the temperature >80°C

  • Working Pressure:

1.0Mpat /1.6Mpa / 2.5Mpa /3.0Mpa,upto 5.0Mpa which depends on the application.

  • DNs(Suc),

up to 400mm or tailor design. Flange standard can be DIN,AS,ANSI,JIS,GOST or other standard..

ZA/EZE(foot-mounted ,centerline-mounted)                                             

EZA/EZE is API 610 OH1 and OH2 ,single stage, end suction pump with back-pull-out structure ,the pump that is completely designed according to API610 8th and VDMA24297,  which meets the standard of ISO5199& ASME 73.1. to ensure the dimensional interchangeability with other pumps. EZA/EZE  type end suction pump is EU-Flo major pumps for application of single stage end suction pump. The EZA/EZE end suction pumps are usually applied for chemical process industries, oil or liquid with less solids or solids. After being Equiped with EU-Flo optional skit, EZA/EZE also used for hot oil and light corrosive liquid and sea water.EZA/EZE type end suction pump usually has closed impeller, the semi-open and open impeller of vortex can be supplied as well .

The foot-mounted and centerline-mounted structure :                                     

Impeller Classification                                                                      

Features                                                                                   

  • Meet all API 610 requirements for temperatures below 150⁰C(EZA) or 450⁰C(EZE).
  • End-top nozzle design
  • Single or double volute depending on size to reduce radial forces
  • Back pull-out assembly and easy maintenance without disturbing the driver, coupling hubs or casing…
  • Inducer design and many other options available
  • High Efficiencies and reduced energy consumption, 3D design used in the whole design process and CFD analysis and being embodied with knowledge and experience of the fluid experts in EU-Flo Pump.
  • Exceeds standard requirements of ASME B73.1 standard
  • Modular design reduce the number of sizes of the spare parts to allow manage the spare parts easily.
  • Standard bearing lubrication is oil, the Grease lubrication is also possible.
  • Optional shaft sealing for single seal mechanical seal, double mechanical seal, cartridge mechanical seal, Seal area meet API 682

 

  • Optional stuffing box cooled by third coolant, bearing bracket with cooling jacket or finned shape to allow the pump to transfer your very hot liquid. suitable for the most demanding industrial applications
  • Quick and easy installation, safe operation, easy maintenance and service
  • Versatile,reliable, high efficiency hydraulic and material options
  • All metallurgies available

Benefits                                                                                   

  • Simple structure to save your maintenance cost and project budget.
  • large-scale production to ensure economic cost and easy spare parts supply.
  • Improved efficiency.
  • Many choices for material, cast steel, all stainless steel and duplex stainless steel, bronze for your different application.
  • Wind performance range and optional tailor-made design service to allow you to have a reasonable project design in EU- Pump’s end suction pumps.
  • Excellent pumps with shortly delivery.
  • Long lifetime and easy maintenance of Back pull-out assembly without disturbing the driver, coupling and pipeline

Applications                                                                                

  • General Industries of chemical process for hot oil and hot liquids, crude oil.
  • Food & beverage
  • Sewage Treatment Plant
  • Pumping and mixing solutions for pulp and paper main processing
  • Biofuels
  • Fertilizers
  • Desalination
  • Petrochemical processing
  • Clear and lightly contaminated liquids
  • Viscous liquids
  • Fibrous slurries
  • Large solids containing liquids

Operation Range                                                                                

  • Capacity:

up to 722L/s (2600m3h), if you need special performance, EU-Pump can offer tailor-made pumps for your application

  • Head:

up to 300m(984ft), if you need special performance, we can offer tailor-made pumps for your application

  • Temperature:

up to 425°C, the declaration should be cleared before the project inquiry if the temperature >80°C

  • Working Pressure:

1.0Mpat /1.6Mpa / 2.5Mpa /3.0Mpa,upto 5.0Mpa which depends on the application.

  • DNs(Suc),

up to 400mm or tailor design. Flange standard can be DIN,AS,ANSI,JIS,GOST or other standard..

Fire Fighting Pumps

Overview

Fire Fighting End-Suction Pump

Fire pump is a part of fire sprinkler system’s water supply. When the pressure in sprinkler system risers and standpipes drops below a threshold, fire pump starts to provide water flow at a higher pressure.

Powered by electric motor or diesel engine, fire pump contains below 4 main types: horizontal split case fire pump, end suction fire pump, vertical in-line fire pump, and vertical turbine fire pump. They are centrifugal pumps with high efficiency at transferring water over a wide range of flow and pressure. A Jockey pump is a small multistage centrifugal pump connected to a branch fire pipeline to maintain system pressure to a high level.

Feature:                                                                                      

Bearing: Increase size bearing for long bearing life and smooth running Impeller: Shrouded impeller design provide high efficiency & low hydraulic thrust. Design: Hydraulic design provide high efficiency, low NPSH & stable characteristics:

  • Single stage horizontal centrifugal fire pump
  • Available with electric or diesel drive
  • Back pull-out design allows easy maintenance
  • The heavy-duty power frame of the CPP incorporates additional oil cooling and heat dissipation
  • Robust 316SS sleeved shaft (as standard) for extended seal life
  • Vertical discharge on the center line
  • Enclosed impeller design ensures maximum efficiency
  • Standard Inpro/Seal® bearing isolators
  • Double row thrust bearing that provides minimal shaft end play for extended mechanical seal life

 

Performance Range:                                                                          

  • Discharge Diameter: 32mm to 350mm
  • Suction Diameter: 50-400mm
  • Capacity range: 5m3/hr~1100m3/hr
  • Max working pressure: 16BAR (40 bar on request)

Certificate:

CCCF / FM

Product Type:

 Electric motor or diesel engine driven fire pump sets with air cooling & water cooling

NFPA20 Package

 

 Advantage:                                                                                    

 

First-Class international technical standards and inspection equipment.

 

CCCF/FM certification represents the world’s highest technical standards of fire certification, but also means that certified fire products must withstand the most extreme, harsh test process, the purpose of certification designed to verify whether the product meets the performance, safety and quality requirements, so as to achieve the purpose of property protection.

 

Application:                                                                                 

 

Large hotels, hospitals , schools,office buildings,supermarkets, commercial residential buildings, metro stations, railway stations, airports, kinds of transportation tunnels, petrochemical plants, thermal power plants, terminals, oil depots, large warehouses and industrial and mining enterprises, etc.

 

 

 

 

 

 

 

Energy Efficient Split Case Pump

Overview

A horizontal split case pump is a unique type of centrifugal pump whose casing is divided into two distinct chambers, which is different from inline or end suction pumps that are assembled with the suction nozzle, discharge nozzle, and casing in one chamber.

The casing can be split vertically or horizontally, relative to the impeller, which gives you either a vertical split case or a horizontal split case pump,respectively. Some manufacturers also offer custom configurations to optimize the pump for specific applications.

Horizontal split case centrifugal pumps are designed with the suction and discharge nozzles in the bottom half of the casing,side by side, while the impeller shaft is positioned between two bearings, one on each side.

This rugged but simple design is particularly suitable for higher flow applications as it reduces thrust loads and allows for operation over a broad range of capacities. With proper application, HSC pumps offer minimal power consumption, low maintenance costs, and extended service life.

Other design features of HSC pumps include:.

A double suction impeller that offers lower axial thrust and superior Net Positive Suction Head (NPSH).

Double volute casing to minimize radial bearing loads.

Dual pump seals to seal suction pressure.

Common applications of horizontal split case(HSC) pumps.

These pumps are typically used to carry low-viscosity liquids such as clear water and unsaturated wastewater from industrial processes at average heads.

HSC pumps can be used for higher flow rate applications that are not suitable for end suction pumps,such as fire pumps,portable water distribution, plant make-up water, pipelines, cooling water, and other industrial process flows with fairly thin fluids.

Depending on your specific application, you can option for either the single stage HSC pump with a head of up to 550 feet at 140,000 gpm, or the multi-stage HSC pump with a maximum head of 2.200 ft, max. operating pressure of 740 psi, and flow range of up to 2,000 gpm, which is suitable for heavy duty, high pressure applications.

Keep in mind that HSC pumps are not suitable for transporting thick or viscous liquids, as well as those containing solids

Energy Efficient Split Case Pump&bi-axial coupling

UES (Horizontal) or UESV (Vertical) Split case pump is designed by our company for the demand of Energy Efficiency, which combined the advantage of the word well-know manufacture. which have the Characteristics of higher Efficiency and Bi-Axial Coupling

 

Designed and Focused on the application of the current advanced ternary flow theory, CFD,CAE..the pump Efficiency over the world leading level, has the advantage of excellent structure, smooth operation, low noise, easy maintenance and many other advantages, Which is widely used in the power industry, water conservancy industry, steel industry, petrochemical industry, water project, municipal , waste water treatment, shipbuilding industry, mineral exploration, aviation industry and other industry.

Features                                                                                   

  • Double volute design for pumps with single head over 160m, completely balance the radial force and ensure reliable service and save your maintenance costs.
  • Horizontal and vertical construction allow your flexible installation request.
  • Foot support and centerline support is optional for your flexible application.
  • The Pump are biaxial Structure for both rotation clockwise (CW) and anti-clockwise (CCW)
  • Optional shaft sealing for single seal mechanical seal, double mechanical seal, cartridge mechanical seal and soft packing.
  • Optional stuffing box cooled by third coolant, bearing bracket with cooling jacket or finned shape to allow the pump to transfer your very hot liquid.
  • Normally the suction and discharge Flange is horizontal at the same centerline. EU-Flo Pump can also supply suction nozzle is down or vertical, discharge nozzle vertical to fit your pipeline arrangement.
  • Bearing lubrication is optional for grease or oil. Sleeve bearing is also possible.
  • Optional bearing temperature and vibration sensors allow you to know the working of the pump.

Benefits                                                                                   

  • High Efficiencies and reduced energy consumption, double suction impeller with optimum hydraulics optimized by CFD analysis and the fluid experts from EU-Flo Pump
  • 3D design to ensure nice performance and excellent construction.
  • Some double Volute Casing design, Pumps generating high heads have double volutes to reduce radial forces, ensuring minimal shaft deflection and low bearing loads and allow operation over a widely range performance at Best Efficiency Point(BEP).
  • Dynamically balanced impeller that minimizes vibration and maximizes bearing life
  • Low NPSHr and high efficiency at wide performance range.
  • Many choices for material, cast iron, cast steel, all stainless steel and duplex stainless steel, bronze for your different application.
  • Wide performance range allow you to have a reasonable project design in EU-Flo Pump’s EOW(V)
  • Dry shaft design with shaft sleeve protection
  • Compacted design allow you save your landing space.
  • Long lifetime and easy maintenance without dismantling piping and supports.

Application                                                                                

  • Municipal water supply and distribution
  • Flood pumping station
  • Sewage Treatment Plant
  • Water transport and Circulation
  • Desalination
  • Irrigation, drainage
  • Industrial water treatment
  • District cooling / heating
  • Plumbing & sanitary
  • HVAC
  • Fire- fighting
  • General Industries
  • Power Plant
  • Metal Smelting
  • Mineral
  • Marine & offshore
  • Oil& Gas

Operation Range                                                                          

  • Capacity:

up to 7000L/s (25200m3h), if you need special performance, EU-Pump can offer tailor-made pumps for your application

  • Head:

up to 280m(920ft), if you need special performance, we can offer tailor-made pumps for your application

  • Temperature:

up to 160°C, the declaration should be cleared before the project inquiry if the temperature >80°C

  • Working Pressure:

1.0Mpat /1.6Mpa / 2.5Mpa /3.0Mpa which depends on the application.

  • DNs(Suc):

up to 1400mm or tailor design. Flange standard can be DIN, ANSI,AS,JIS,GOST or other standard

Fire Fighting Split Case Pump

Overview

Fire Fighting Pump Split Case 

Horizontal Split Case pump

Horizontal Split Case Fire Pump FOWM

FOWM Firefighting pump is split axially, with opposing suction and discharge flanges, greatly simplifying maintenance. With balanced bearings and a robust overall design it’s not uncommon to find HSC horizontal split case pumps still in use after many years of service.  Suitable for electric or diesel engine drives.

FOWM Horizontal Split Case Fire Pumps are UL Listed & FM Approved and are in compliance to NFPA 20 Design Requirements. The fire Pumps come in a wide range of Flows and pressures ranging from 150 psi to 2000 psi. FOWM Split Case Pumps pass through rigorous Hydrostatic & Performance test, as required by global standards. These Fire pumps are available in Electric Motor & Diesel Engine Driven configurations.  Technical Data Table.  The range of Horizontal Split Case Fire Pumps has a wide array of models, which come in varied flows & pressures. For more detailed information please contact our sales team or you can download our Catalog from below.  NOTE:.  FOWM Pumps are Hydrostatically Tested to minimum of 150% of its Maximum Working Pressure and can withstand Double the Max.Working Pressure.  All FOWM Pumps have Clock-Wise Rotation when viewed from the Driver Side.  All Pumps are horizontal single stage Pumps.  “The rated speed marked on the pump can vary within +/-4% of the listed/ approved rated speed example: 3000 RPM pump can be driven with 2900 RPM Drivers.”.  UL Listed Rated Net Pressure Range (PSI).  Dynamically Balanced double suction impellers extend bearing life and ensure smooth operation.  Casing with Thru-Bore allowing Easy Removal of the entire rotating assembly, including both stuffing boxes, and the entire bearing housing assembly.  Volute Type Casing with double suction provides suction and discharge nozzles cast integral with the lower half of the casing. Optional Double Volutes Casing and LOW Pulse double suction impeller to reducing radial forces and low bearing loads, ensuring minimal shaft deflection and pump with wide range Best Efficiency Point and Higher Efficiency compared . the Ultra Efficiency Horizontal Split Case(HSC) Both the Inboard & Outboard Bearing can be completely replaced without disturbing pipeline . any other part of the rotating assembly, due to the Cartridge bearing arrangement.  Suction & Discharge Gauges with shut-off cocks. With Lower friction falcon slot Type Renewable casing wear rings to reduce Volume loss and reduce internal leakage, Bearing housing can be inspected and/or replaced without removing casing top.  Grease lubricated bearings standard.  Multi-vane, enclosed, high efficiency impeller with broad band operating range.  Bronze, API style, stepped case wear rings.  125# suction/125# discharge flange with 250# cast dimensions standard.  Suction & discharge gauge connections standard.  Turned, ground and polished 420 stainless steel shaft standard.  Heavy duty, 304 stainless steel shaft sleeves with exclusive external o-ring groove.  Single row groove inboard and single row outboard bearings with optional double row at either location.for Easy Maintenance and proper running clearances.  Heavy wall thickness to provide for generous corrosion allowance and high working pressures.  Heavy Duty outboard bearing fixed rigidly in housing to take end thrust load.  Lip Seals for both bearings protects the bearing housing from contaminants.  Suction & Discharge connections placed in lower half, allows removal or inspection of upper half and rotating assembly without disturbing piping or driver. 

FOWM/FOWE is the axially split case pump, single stage, double suction pump. FOWM is the horizontal single stage motor driven split case pump and FOWE is the single stage engine driven split case pump. The FOWM type horizontal split case pump and FOWE type split case pump have the same performance. FOWM/FOWE split case pump is pump featured with high efficiency and reliable performance. Due to the excellent performance and high quality from EU-Flo Pump, the pumps are widely selected by the users all over the world for their primary liquid pumping equipment in fire fighting.

Application:                                                                                

Industrial fields: All petroleum, petrochemical, chemical, oil fields, pipelines bureaus, oil repositories, oil terminals, oil refineries, offshore platforms, etc.; National grain storages, thermal power plants, steel plants, shipyards, paper mills, etc.;

Commercial Field: five-star hotels, hospitals, schools, supermarkets, office buildings, large-scale commercial complex, highway tunnels, subway stations, railway stations, airports; Fire-fighting Engineering Companies;

How It Works:                                                                                 

The most common split case pump is a single-stage, between bearing, non-self-priming centrifugal volute pump. The design of the pump allows for easy removal of the pump’s top casing to enable easy access to the pump’s components without disturbance with the motor or the piping system.

The independent bearing casing allows for easy maintenance without the need for removing the pump’s top casing. The pump’s double volute design minimizes the radial load on the shaft, increasing component life and reducing vibrations to provide a quiet operation.

CHARACTERISTICS

  • Compact design and efficient operation
  • Shaft sleeve to protect the shaft against corrosion and wear
  • Interchangeable radial and thrust bearings with grease lubrication are guaranteed
  • Enclosed, double suction impeller, casted in one-piece and balanced to minimize thrust and ensure longer bearing life
  • Available with electric or diesel drive
  • Stuffing box as options

Key Features:                                                                                 

Complete compact structure

Horizontal installation and running smoothly

Vertical installation available by Angle Gearbox

Tailored to the customer’s required standards and specifications

Configuration for NFPA20 / FM / UL up to 4000 US gpm

Good suction characteristics, also with higher speeds

Fully Operation Range on Performance

Less wear and perfectly Efficiency

Easy maintenance without disturbance on piping / drive

Select Models Available in alternate materials with FM approval

 

Advantage and Benifits

Ease of installation and maintenance

Wide range of applications

Construction materials for seawater service are available

 We are the member of NFPA among Chinese pump manufacturers. The production of our fire pump groups is strictly in accordance with NFPA20.

We are one specially manufacturer in the world who have both UL/FM certification for fire pump and the fire-fighting diesel engine, also the only UL Witness laboratory in Asia for fire-fighting pump and fire-fighting diesel engine.

With lots of patents.

 

 

 

 

 

 

 

Split Casing Pump EOW

Overview

Split Case Pump EOW

A horizontal split case pump is a unique type of centrifugal pump whose casing is divided into two distinct chambers, which is different from inline or end suction pumps that are assembled with the suction nozzle, discharge nozzle, and casing in one chamber.

The casing can be split vertically or horizontally, relative to the impeller, which gives you either a vertical split case or a horizontal split case pump,respectively. Some manufacturers also offer custom configurations to optimize the pump for specific applications.

Horizontal split case centrifugal pumps are designed with the suction and discharge nozzles in the bottom half of the casing,side by side, while the impeller shaft is positioned between two bearings, one on each side.

This rugged but simple design is particularly suitable for higher flow applications as it reduces thrust loads and allows for operation over a broad range of capacities. With proper application, HSC pumps offer minimal power consumption, low maintenance costs, and extended service life.

Other design features of HSC pumps include:.

A double suction impeller that offers lower axial thrust and superior Net Positive Suction Head (NPSH).

Double volute casing to minimize radial bearing loads.

Dual pump seals to seal suction pressure.Common applications of horizontal split case(HSC) pumps.

These pumps are typically used to carry low-viscosity liquids such as clear water and unsaturated wastewater from industrial processes at average heads.

HSC pumps can be used for higher flow rate applications that are not suitable for end suction pumps,such as fire pumps,portable water distribution, plant make-up water, pipelines, cooling water, and other industrial process flows with fairly thin fluids.

Depending on your specific application, you can option for either the single stage HSC pumpwith a head of up to 550 feet at 140,000 gpm, or the multi-stage HSC pumpwith a maximum head of 2.200 ft, max. operating pressure of 740 psi, and flow range of up to 2,000 gpm, which is suitable for heavy duty, high pressure applications.

Keep in mind that HSC pumps are not suitable for transporting thick or viscous liquids, as well as those containing solids

EOW or EOWV is the interchange with OMEGA or RDL, EOW or EWWV type is the axially split case pump, single stage, double suction pump. EOW is the horizontal single stage split case pump and EOWV is the vertical single stage split case pump. The EOW type horizontal split case pump and vertical EOWV type split case pump have the same performance. EOW(V) split case pump is pump featured with high efficiency and reliable performance. Due to the excellent performance and high quality from EU-Flo Pump, the pumps are widely selected by the users all over the world for their primary liquid pumping equipment in their projects.
However, EU-Flo Pump is always making the innovation of the NPSHr and efficiency and expanding the performance range of EOW(V) split case pump in order to meet the clients’ more application requirements. EOW(V) is the ideal split case pump for your projects.

Features:                                                                            

  • Double volute design for pumps with single head over 160m, completely balance the radial force and ensure reliable service and save your maintenance costs.
  • Horizontal and vertical construction allow your flexible installation request.
  • Foot support and centerline support is optional for your flexible application.
  • Optional rotation for clockwise (CW) and anti-clockwise (CCW).
  • Optional shaft sealing for single seal mechanical seal, double mechanical seal, cartridge mechanical seal and soft packing.
  • Optional stuffing box cooled by third coolant, bearing bracket with cooling jacket or finned shape to allow the pump to transfer your very hot liquid.
  • Normally the suction and discharge Flange is horizontal at the same centerline. EU-Flo Pump can also supply suction nozzle is down or vertical, discharge nozzle vertical to fit your pipeline arrangement.
  • Bearing lubrication is optional for grease or oil. Sleeve bearing is also possible.
  • Optional bearing temperature and vibration sensors allow you to know the working of the pump.
  • Benefits:                                                                                
  • High Efficiencies and reduced energy consumption, double suction impeller with optimum hydraulics optimized by CFD analysis and the fluid experts from EU-Flo Pump
  • 3D design to ensure nice performance and excellent construction.
  • Some double Volute Casing design, Pumps generating high heads have double volutes to reduce radial forces, ensuring minimal shaft deflection and low bearing loads and allow operation over a widely range performance at Best Efficiency Point(BEP).
  • Dynamically balanced impeller that minimizes vibration and maximizes bearing life
  • Low NPSHr and high efficiency at wide performance range.
  • Many choices for material, cast iron, cast steel, all stainless steel and duplex stainless steel, bronze for your different application.
  • Wide performance range allow you to have a reasonable project design in EU-Flo Pump’s EOW(V)
  • Dry shaft design with shaft sleeve protection
  • Compacted design allow you save your landing space.
  • Long lifetime and easy maintenance without dismantling piping and supports.
  • Application:                                                                          
  • Municipal water supply and distribution
  • Flood pumping station
  • Sewage Treatment Plant
  • Water transport and Circulation
  • Desalination
  • Irrigation, drainage
  • Industrial water treatment
  • District cooling / heating
  • Plumbing & sanitary
  • HVAC
  • Fire- fighting
  • General Industries
  • Power Plant
  • Metal Smelting
  • Mineral
  • Marine & offshore
  • Oil& Gas
  • Operation Range:                                                                    
  • Capacity:
  • up to 7000L/s (25200m3h), if you need special performance, EU-Pump can offer tailor-made pumps for your application
  • Head:
  • up to 280m(920ft), if you need special performance, we can offer tailor-made pumps for your application
  • Temperature:
  • up to 160°C, the declaration should be cleared before the project inquiry if the temperature >80°C
  • Working Pressure:
  • 1.0Mpat /1.6Mpa / 2.5Mpa /3.0Mpa which depends on the application.
  • DNs(Suc):
  • up to 1400mm or tailor design. Flange standard can be DIN, ANSI,AS,JIS,GOST or other standard

 

 

 

 

 

 

 

Fire Fighting Pump Vertical Turbine

Overview

Vertical turbine pump for Fire Fighting

A vertical turbine pump is an extremely versatile type of centrifugal pump that has a wide range of applications. They can be configured to provide both high flow and high pressure as needed and offer strength over other pump types for transferring liquid. Let’s take a look at the vertical turbine pump, how it works, and where they can be found in use.

What Is a Vertical Turbine Pump?

A vertical turbine pump is a specialized type of centrifugal pump that is designed to transport fluid from a reservoir that is often deep underground. Unlike a submersible pump that has the motor contained with the pump inside the liquid to be transported, these pumps are connected to a surface motor through the use of a long vertical shaft.

Vertical turbine pumps have the strength in that they allow for motor replacement and repair without removing the entire pump assembly. Since the motor sits on the surface, the drive motor choice can be more flexible, including gas and electric options.

Vertical turbines are commonly used in all types of applications, from moving process water in industrial plants to providing flow for cooling towers at power plants, from pumping raw water for irrigation, to boosting water pressure in municipal pumping systems, and for virtually every other imaginable pumping application. Turbines are one of the most popular types of pumps for designers, end-users, installing Contractors, and distributors.

There are many types of turbine pumps. But vertical turbines and submersible turbines are the most widely applicable. The primary technical difference between the two lies in where the motor is located. In vertical turbines, the motor is above ground and connected to the impellers through a long shaft. In submersible turbine pumps, the motor is underwater at the bottom of the pump. At Service Pump & Supply, we sell, install, and service both vertical and submersible turbines.

FVTM/FVTE is type  vertical turbine pump (sometimes called long-shaft pump) with centrifugal type impeller, volute design. FVTM/FVTE type vertical turbine pump is completely according to API 610 application and performance request designed. The FVTM/FVTE vertical turbine pump is driven by standard vertical compact motor or driven by horizontal driver (electric motor, diesel engine) by the right angle gear box. The underground column and shaft is divide into several sections, so FVTM/FVTE type vertical turbine pump is flexible to get the desired length to meet the deepth of the well. FVTM/FVTE type vertical sump pump can offer any tailor-made according to the project request.

FVTM/FVTE struction                                                                        

Features                                                                                   

  • 3D design used in the whole design process and CFD analysis and being embodied with knowledge and experience of the fluid experts in EU-Flo
  • Modular and fine hydraulic performance, high efficiency and good production quality.
  • The shaft sealing is optional for mechanical seal and soft packing.
  • The long column is divided into several flanged type sections, it is flexible to get your desired length.
  • The long shaft has several sections that is coupled together by sleeve and fixed inside sleeve bearings to ensure the coaxial.
  • Sand collar are used to stop the sand or solids.
  • Sleeve type liquid lubricated bearing has long life time.
  • Upper stood is possible to tailor-made.
  • Heavy duty service design, the shaft can absorb the huge and unstable torque.
  • Volute design ensure  axial thrust minimum

 

 

Benefits                                                                                    

  • Advance and modular design with fine production that is supplied by EU-Flo Pump.
  • Sleeve bearings are made of fine material or supplied by famous brand, like Canada Thordon.
  • Flexible column length.
  • Supper technical team and find production to ensure the tailor-made and best quality.
  • Complete testing system to ensure the performance before delivery.
  • Many choices for material, cast iron,cast steel, all kinds of stainless steel, duplex stainless steel and steel alloy.
  • Excellent pumps with fast delivery.
  • Epoxy coated parts submerged inside the liquid.
  • Wet pit installation for lower NPSH request of condensation,
  • Heavy Duty, Double Suction option

Application                                                                                

  • Municipal water supply
  • Condensation of Power Plant
  • General Industries of Process for oil and liquids
  • Food & beverage
  • Fire- fighting
  • Fertilizers
  • Biofuels
  • Metal Smelting
  • Marine & offshore
  • Oil& Gas

Operation Range                                                                          

  • Capacity

up to 2500L/s (9000m3h), or as per tailor-made.

  • Head

up to 150m(492ft), or as per taitor- made.

  • Working temperature

up to 60°C

  • Design pressure

1.6Mpa / 2.5Mpa

  • Nozzle

up to 1200mm or tailor design. Flange standard can be DIN, AS,ANSI ,JIS,GOST or other standard.

 

 

 

 

 

 

 

Split Case Pump EOS

Overview

EOS(A) Pump is the axially split case pump, single stage, double suction pump, designed to the countries with 50Hz electricity. EOS(A) is EU-Flo Pump’s first generation axially split case pump with double suction impellers which is widely chosen by users in the water station and municipal plants and industrial plants.
After several innovation according to the feedback from end users, EOS(A) split case pump has more better features than the previous products and application fields are expanded as well. EOS(A) Pump are going to optimize the performance again and let it to be our another nice choice of axially split case pump to meet different performance in the market.

Features                                                                                  

  • Single volute case design for all sizes to simplify the design and easier production.
  • The stuffing box is embodied into the case, so reduce the part numbers of the pump and machining cost then reduce the cost the pumps.
  • Axially split bearing bracket to allow easier assembling and maintenance without dismantling piping and supports..
  • Optional rotation for clockwise (CW) and anti-clockwise (CCW).
  • Optional shaft sealing for single seal mechanical seal, double mechanical seal, cartridge mechanical seal and soft packing.
  • Bearing lubrication is grease only if oil lubrication will be specialy tailor-made

Benefits                                                                                      

  • High Efficiencies and reduced energy consumption, double suction impeller with optimum hydraulics optimized by CFD analysis and the fluid experts from EU-Flo Pump
  • Low NPSHr and wide range at high efficiency.
  • Dynamically balanced impeller that minimizes vibration and maximizes bearing life
  • Many choices for material, cast iron, cast steel, all stainless steel and duplex stainless steel, bronze for your different application.
  • Excellent pumps with economic price and shortly delivery.
  • Compacted design allow you save your landing space.
  • Ÿ Long lifetime and easy maintenance without dismantling piping and supports.

Application                                                                                

  • Municipal water supply
  • Flood pumping station
  • Sewage Treatment Plant
  • Water Circulation
  • General Industries
  • Power Plant
  • Industrial water treatment
  • Plumbing & sanitary
  • HVAC
  • Fire- fighting
  • Metal Smelting
  • Mineral
  • Marine & offshore
  • Oil& Gas

Specifications                                                                             

  • Capacity:

up to 6220L/s (22390m3h), if you need special Performance, EU-Flo Pump can offer tailor-made pumps for your application

  • Head:

up to 150m, if you need special performance, we can offer tailor-made pumps for your application

  • Working temperature:

up to 200°C

  • Design pressure:

up to 4.0 Mpa which depends on the application.

  • Dis Flange :

up to 1200mm or tailor design. Flange standard can be DIN, AS,ANSI,JIS,GOST or other standard.