ESG Type inline Pump are API OH5 type ,single stage, close-coupled pump, which meets the standard ISO5199 and peformance meeting ISO2858 pump . IEC and options NEMA motor is coupled together through the sleeve or coupling clutch. The pump and motor can also share the same shaft. So ESG type close-coupled pump is not necessary to verify the coaxial state and easy to maintenance. The pump and the motor is fixed directly together through coupling bracket, then the completely set installed on the common base frame.
- High Efficiencies and reduced energy consumption, 3D design used in the whole design process and CFD analysis and being embodied with knowledge and experience of the fluid experts in EU-Flo Pump.
- Modular design reduce the number of sizes of the spare parts to allow manage the spare parts easily.
- Reliable, Simplified and heavy-duty bearing unit with variety of difference lubrication, Standard bearing is Grease lubrication ,but oil lubrication is also possible.
- Optional shaft sealing for single mechanical seal, double mechanical seal, cartridge mechanical seal
- Optional stuffing box cooled by fan.
- Simple structure to save your maintenance cost and project budget.
- Fully range of selection chart for you variable design requirement
- Improved efficiency. excellent performance and superior quality
- Many choices for material, Ductile Iron ,cast steel, all stainless steel and duplex stainless steel, bronze for your different application.
- Quick and easy installation, safe operation, easy maintenance and service
- Long lifetime and easy maintenance.
- Pump and motor joint by coupling , options for IEC and NEMA motor installation,
- Standard is Close impeller ,Options semi open impeller and open impeller for solid contained.
- General Industries of chemical process for hot oil and hot liquids, crude oil.
- Food & beverage
- Sewage Treatment Plant
- Petrochemical processing
- Clear and lightly contaminated liquids
- Viscous liquids
- Water circulation and HVAC
up to 666L/s (2400m3h), if you need special performance, EU-Flo Pump can offer tailor-made pumps for your application
up to 150m(492ft), if you need special performance, we can offer tailor-made pumps for your application
up to 120°C
up to 2.5Mpa.
up to 500mm or tailor design. Flange standard can be DIN, ANSI, AS,JIS and GOST or other standard