China Pump Manufacturers-Industrial Pumps&System Solution

A horizontal split case pump is a unique type of centrifugal pump whose casing is divided into two distinct chambers, which is different from inline or end suction pumps that are assembled with the suction nozzle, discharge nozzle, and casing in one chamber.

The casing can be split vertically or horizontally, relative to the impeller, which gives you either a vertical split case or a horizontal split case pump,respectively. Some manufacturers also offer custom configurations to optimize the pump for specific applications.

Horizontal split case centrifugal pumps are designed with the suction and discharge nozzles in the bottom half of the casing,side by side, while the impeller shaft is positioned between two bearings, one on each side.

This rugged but simple design is particularly suitable for higher flow applications as it reduces thrust loads and allows for operation over a broad range of capacities. With proper application, HSC pumps offer minimal power consumption, low maintenance costs, and extended service life.

Other design features of HSC pumps include:.

A double suction impeller that offers lower axial thrust and superior Net Positive Suction Head (NPSH).

Double volute casing to minimize radial bearing loads.

Dual pump seals to seal suction pressure.

Common applications of horizontal split case(HSC) pumps.

These pumps are typically used to carry low-viscosity liquids such as clear water and unsaturated wastewater from industrial processes at average heads.

HSC pumps can be used for higher flow rate applications that are not suitable for end suction pumps,such as fire pumps,portable water distribution, plant make-up water, pipelines, cooling water, and other industrial process flows with fairly thin fluids.

Depending on your specific application, you can option for either the single stage HSC pump with a head of up to 550 feet at 140,000 gpm, or the multi-stage HSC pump with a maximum head of 2.200 ft, max. operating pressure of 740 psi, and flow range of up to 2,000 gpm, which is suitable for heavy duty, high pressure applications.

Keep in mind that HSC pumps are not suitable for transporting thick or viscous liquids, as well as those containing solids

EOS(A) Pump is the axially split case pump, single stage, double suction pump, designed to the countries with 50Hz electricity. EOS(A) is EU-Flo Pump’s first generation axially split case pump with double suction impellers which is widely chosen by users in the water station and municipal plants and industrial plants.
After several innovation according to the feedback from end users, EOS(A) split case pump has more better features than the previous products and application fields are expanded as well. EOS(A) Pump are going to optimize the performance again and let it to be our another nice choice of axially split case pump to meet different performance in the market.

Features                                       

• Single volute case design for all sizes to simplify the design and easier production.
• The stuffing box is embodied into the case, so reduce the part numbers of the pump and machining cost then reduce the cost the pumps.
• Axially split bearing bracket to allow easier assembling and maintenance without dismantling piping and supports..
• Optional rotation for clockwise (CW) and anti-clockwise (CCW).
• Optional shaft sealing for single seal mechanical seal, double mechanical seal, cartridge mechanical seal and soft packing.
• Bearing lubrication is grease only if oil lubrication will be specialy tailor-made

Benefits                                                                                      

• High Efficiencies and reduced energy consumption, double suction impeller with optimum hydraulics optimized by CFD analysis and the fluid experts from EU-Flo Pump
• Low NPSHr and wide range at high efficiency.
• Dynamically balanced impeller that minimizes vibration and maximizes bearing life
• Many choices for material, cast iron, cast steel, all stainless steel and duplex stainless steel, bronze for your different application.
• Excellent pumps with economic price and shortly delivery.
• Compacted design allow you save your landing space.
• Ÿ Long lifetime and easy maintenance without dismantling piping and supports.

Application                                                                                

• Municipal water supply
• Flood pumping station
• Sewage Treatment Plant
• Water Circulation
• General Industries
• Power Plant
• Industrial water treatment
• Plumbing & sanitary
• HVAC
• Fire- fighting
• Metal Smelting
• Mineral
• Marine & offshore
• Oil& Gas

Specifications                                                                             

• Capacity:

up to 6220L/s (22390m3h), if you need special Performance, EU-Flo Pump can offer tailor-made pumps for your application

• Head:

up to 150m, if you need special performance, we can offer tailor-made pumps for your application

• Working temperature:

up to 200°C

• Design pressure:

up to 4.0 Mpa which depends on the application.

• Dis Flange :

up to 1200mm or tailor design. Flange standard can be DIN, AS,ANSI,JIS,GOST or other standard.