EMF Mixed flow centrifugal pumps borrow characteristics from both radial flow and axial flow pumps. As liquid flows through the propeller of a mixed flow pump, the impeller blades push the liquid out away from the shaft and to the pump suction at an angle greater than 90 degrees. The impeller of a typical mixed flow pump and the flow through a mixed flow pump are shown as belowing:, the EMF Mixed flow centrifugal pump can be driven by belt or by electric motor.
Features
3D design used in the whole design process and CFD analysis and being embodied with knowledge and experience of the fluid experts in EU-Flo Pump.
Vertical construction to save your construction spares.
The suction nozzle and discharge nozzle can be any position in times of 90 degree to meet your pipeline system.
Optional shaft sealing for single seal mechanical seal, double mechanical seal, cartridge mechanical seal and soft packing.
Optional stuffing box cooling jacket allow the pump to transfer high temperature liquid.
Optional Bearing bracket with cooling jacket to ensure long bearing life and stable pump working.
Benefits
Optimum hydraulics optimized by CFD analysis and the fluid experts from EU-Flo Pump
Low NPSHr and high efficiency.
3D design to ensure nice performance and excellent construction, High Efficiencies and reduced energy consumption by designing the pump’s BEP to customer duty point
Many choices for material, cast iron, cast steel, all stainless steel and duplex stainless steel, bronze for your different application.
Wide performance range allow you to have a reasonable project design
Excellent pumps with fast delivery.
Absolutely dynamically balanced rotor prolong the lifetime and supply stable performance.
Large scale production and any time spare parts supply and technical support.
Application
Municipal water supply
Flood pumping station
Sewage Treatment Plant
Water Circulation
General Industries
Power Plant
Industrial water treatment
Plumbing & sanitary
HVAC
Fire- fighting
Metal Smelting
Mineral
Marine & offshore
Oil& Gas
Operation Range
Capacity
up to 190L/s (684m3h), or as per any request.
Head
up to 280m(920ft), or as per any request.
Working temperature
up to 160°C
Design pressure
2.5Mpa/4.0Mpa or as per any request.
Dis Flange
up to 300mm or tailor design. Flange standard can be DIN,AS, ANSI,JIS,GOST or other standard.
