EAH/EHH Slurry Pump The products with the internationally advantage of technology from Warman, the centrifugal slurry pump are main Serial of EAH&EHH share many characters in common.
The Products EAH is a kind of horizontal centrifugal pump provided with cantilever. The shaft seal can be packing gland or mechanical seal. base on actual application, the pump discharge flange is adjustable, the angle for each adjustment is 45 degree.
The cantilever centrifugal slurry pump is application for delivery high corrosive slurry in high density in the industry of metallurgy, mine, coal ash, electric power, building material or others .
EHH centrifugal slurry pump, the impeller and the lining of the pump wet parts are made of wearing resistant metal or rubber, the lining for wear-resistant slurry pump is replaceable.
Features:
Slurry pump propeller is dynamically balanced. Outer flanged columns are bolted together with through bolts for ease in assembly. Alignment is maintained via centering fits on all parts. Flared suction bell provides a smooth waterway entrance to the impeller and has intergral vanes to reduce inlet swirl and entrance losses. Seal chamber accepts packing or mechanical seal to suit service requirements. The pump also have anti-reverse rotation ratchet which will prevent high speed reverse operation due to backward direction of water flow
3D design used in the whole design process and CFD analysis and being embodied with knowledge and experience of the fluid experts in EU-Flo Pump.
Revolutionary hydraulic performance design make the pump run at high efficiency.
Special designed cleaning slot can release the solids and strips immediately.
The special back angle of the impeller can thrust the solids or strips towards the out profile of the impeller and easy to be pumped out.
High efficiency submersible squirrel cage save the power consumption.
Optional cooling jacket allow the pump to be suitable for dry installation.
Complete monitor system allow you to operate the pump without any concerns.
The optional blade can cut the strips into chips effectively.
Benefits:
Advance and modular design with fine production that is supplied by Eu-Flo Pump.
High efficiency in long service time.
Maintenance freely or less maintenance.
Many choices for material, cast iron, hart steel, high chrome cast iron, all kinds of stainless steel, duplex stainless steel and steel alloy.
Ultra anti-clogging against solids and fabric strips.
Long lifetime.
Application:
Ball mill discharge
Bottom/fly ash, lime grinding
coal
Coarse sand
Coarse tailings
FGD
Fine Tailings
Flotation
Heavy media
Minerals concentrate
Mineral sands
Ni Acid Slurry
Oil Sands
Phosphoric acid
Phosphoric matrix
Process chemical
Pulp and paper
Rod mill discharge
SAG mill discharge
Wet Crushers
Operation Range:
Capacity
up to 1390L/s (5000m3h), or as per tailor-made.
Head
up to 73m(240ft), or as per taitor- made.
Working temperature
up to 120°C
Design pressure
2.0Mpa
Dis Flange
up to 500mm or tailor design. Flange standard can be DIN, AS,ANSI,JIS,GOST or other standard.