Horizontal Vortex Pump EAP/EES
EAP/EES pump ranges complete with a vortex impeller for solids handling applications. A broad size range conforms to DIN 24255 standard capable of handling a large range of liquids with solids up 30mm in suspension. Available with impeller diameters up to 500mm.
Features
Benefits
Advantage:
Operating range
Applications
Municipal and industrial wastewater
Chemical and crystalline suspensions
– Seawater
– Oils solvents and process liquids
– Aqua-culture
– Eletrophoretic paint
Working pressure
Cast iron pumps are capable of a working pressure of 16 bar. With higher rated flanges, cast steel and stainless steel pumps can be supplied for higher working pressures. All pumps are hydrostatically tested to 1.5 times the rated working pressure.
Mechanical seal
Virtually any make and type of single, double or cartridge mechanical seal may be fitted.
Spare parts
All EAP/EES pumps are fully supported by a generous inventory of spare parts available from stock. Contact the dedicated spares with us
Materials
Castings in a variety of materials are produced in the company’s own ISO 9001 foundry in Bristol, using the Replicast method to produce porosity free castings by shell moulding. Castings can meet EN10204 and ASTM standards where required.
– Cast Iron
– Ductile Iron
– Cast steel: ASTM A216 Grade WCB
– Stainless Steel: ASTM A351 CF8M, CF3M, CF8, CF3
– Duplex stainless steel: ASTM A890 Grade 1B
– Super duplex stainless steel: ASTM A890 Grade 5A
– Titanium: ASTM B367 Grade 2
– Hastalloy C: ASTM A494 Grade CW-12MW
– Cast bronze: BS1400 grade LG2
– Other grades available on request.