EZJ/EZJR vertical sump pump is of vertical cantilevered design with hard alloy wear parts or full rubber covering option which can run continuously in abrasive and corrosive pumping environment. Vertical slurry pumps from EZJ/EZJR not only provide excellent wear life properties, but also operate efficiently to further reduce operating costs. There are no submerged bearings or packing with a unique high capacity double suction design. Optional recessed impeller and suction agitator are available. EZJ/EZJR heavy duty sump pumps are available in various standard length to suit different sump length.
Bearing Assembly The vertical cantilever design with no gland or submerged bearings avoids the need for expensive gland or bearing flushing water.
Back Liner The opened back liner allows plenty of room for the oversized shaft with slurry to pass through and pump from the top and bottom. The top suction draws the slurry away from the drive end.
Casing Casings are made of cast high chrome alloy steel with rubber or metal lined option.
Impeller Double suction impellers create low axial bearing loads, increasing bearing life. Impellers are available in rubber-lined and metal-lined option.
Lower Strainer The lower strainers keep large foreign material entering the casing.
Application
The rugged EZJ/EZJR vertical sump pump with either hard metal or rubber covering are suitable for the following applications: – Water supply
– Minerals Processing
– Coal Preparation
– Industrial Sand and Aggregate
– Power Plants
– Chemical Processing
– Effluent Handling
Features & Benefits
Cantilever design without submerged bearings or shaft seal
High capacity double suction design
Agitator option keeps solids in suspension
Wear parts are available in variety of different material
Optional recessed impeller for oversized material
Open and semi-open impeller available
EZJR models features full rubber covering for corrosion resistance