tel
  • +86-21-64911960
  • Call us for Consultation
greentel

+008613391393652

VTG (VS5) Vertical Sump Pump

  • Contact Us

  • Eu-Flo Pump Industries Co Ltd
  • Pump Expert of European Standard
  • Tel: 021-64911960
  • Phone: 13391393652
  • Email: i[email protected]
  • Address:Room 1506, 638 Heng Feng Road, Su He No.1 Mansion,200040.Shanghai,China

Similar Products

  • BED,BDG(BB5) Barrel Multistage Centrifugal Pump

    Description:eps bb1 between bearing axially split casing pump

    More
  • EDG(BB4) Multistage Ring Section Centrifugal Pump

    Description:eps bb1 between bearing axially split casing pump

    More
  • EDK(BB3) Between Bearing Multistage Axially Split Casing Pump

    Description:eps bb1 between bearing axially split casing pump

    More

VTG is type of VS5 Submerged pump, vertical structure with centrifugal type impeller, VTG adopts a cylinder tube to connect its hydraulic parts and base , as its drain pipe, equipped with no shaft seal, is separate from the cylinder pipe and submerged part of the pump has no shaft seal, this single stage centrifugal pump could be used liquid and transport media containing grains.

No promote transportation of grains of different size and properties, we now provide submerged pipes of this model which could be equipped with two sorts of impellers–the closed impeller and open impellers, the open type is suitable for transportation of grains of larger size and high density. Depth of immersion of this cantilever pump is determined by its motor. The bearing frames available for this pump could be large as 700 to 800mm. If necessary, we could provide  API VS5 pump equipped with Suc Pipe.

This single-stage pump could be used to transport organic and inorganic acids, alkaline solution, saline solutions and slurries in compound fertilizer production, it has been widely used in the petrochemical, chemical, mining, paper and pulp making and food processing industries as well as the rolling mill, steel works and waterworks and so forth

Features                                                                                     

  • 3D design used in the whole design process and CFD analysis and being embodied with knowledge and experience of the fluid experts in EU-Flo Pump.
  • Centrifugal type impeller has fine hydraulic performance, high efficiency and good production quality, impeller have option of closed, semi open:
  • side interface nozzle
  • cantilever design without submerged bearings and without shaft seal.
  • The long column is devided into several flanged type sections, it is flexible to get your desired length.
  • The long shaft has several sections that is coupled together by sleeve clutches and fixed inside sleeve bearings to ensure the coaxial.
  • Sand collar are used to stop the sand or solids.
  • Sleeve type liquid lubricated bearing has long life time.
  • Upper stood is possible to tailor-made.
  • Bearing assembly is sealed-off to prevent bearing contamination

Benefits                                                                                   

  • Advance and modular design with fine production that is supplied by EU-Flo Pump.
  • Sleeve bearings are made of fine material or supplied by famous brand, like Canada Thordon.
  • Flexible column length.
  • Supper technical team and find production to ensure the tailor-made and best quality.
  • Complete testing system to ensure the performance before delivery.
  • Many choices for material, cast steel, all kinds of stainless steel, duplex stainless steel and steel alloy.
  • Excellent pumps with fast delivery.
  • Epoxy coated parts submerged inside the liquid.

Application                                                                                

  • Molten sulphur
  • Closed and open drains, drums and sumps
  • Process condensate
  • Amine mixing
  • Stabiliser reboiler
  • Oily water seperation
  • Hydrolyzer feed
  • Vapour recovery
  • Condensed water injection
  • Foul and sour water service
  • Metal Smelting
  • Hydrofiner/hydrotreater drains
  • Acid gas K.O. drums

Operation Range                                                                          

  • Capacity

up to 111L/s (400m3h), or as per tailor-made.

  • Head

up to 110m(360ft), or as per taitor- made.

  • Working temperature

up to 200°C

  • Design pressure

1.6Mpa / 2.5Mpa/4.0Mpa

  • DNs(Suc),

up to 350mm or tailor design. Flange standard can be DIN, AS,ANSI,JIS,GOST or other standard.

 

 

INQUIRY NOW