• +86-21-64911960
  • Call us for Consultation


Fire Fighting Pump Vertical Turbine

  • Contact Us

  • Eu-Flo Pump Industries Co Ltd
  • Pump Expert of European Standard
  • Tel: 021-64911960
  • Phone: 13391393652
  • Email: [email protected]
  • Address:Room 1506, 638 Heng Feng Road, Su He No.1 Mansion,200040.Shanghai,China

Similar Products

    Vertical turbine pump for Fire Fighting

    A vertical turbine pump is an extremely versatile type of centrifugal pump that has a wide range of applications. They can be configured to provide both high flow and high pressure as needed and offer strength over other pump types for transferring liquid. Let’s take a look at the vertical turbine pump, how it works, and where they can be found in use.

    What Is a Vertical Turbine Pump?

    A vertical turbine pump is a specialized type of centrifugal pump that is designed to transport fluid from a reservoir that is often deep underground. Unlike a submersible pump that has the motor contained with the pump inside the liquid to be transported, these pumps are connected to a surface motor through the use of a long vertical shaft.

    Vertical turbine pumps have the strength in that they allow for motor replacement and repair without removing the entire pump assembly. Since the motor sits on the surface, the drive motor choice can be more flexible, including gas and electric options.

    Vertical turbines are commonly used in all types of applications, from moving process water in industrial plants to providing flow for cooling towers at power plants, from pumping raw water for irrigation, to boosting water pressure in municipal pumping systems, and for virtually every other imaginable pumping application. Turbines are one of the most popular types of pumps for designers, end-users, installing Contractors, and distributors.

    There are many types of turbine pumps. But vertical turbines and submersible turbines are the most widely applicable. The primary technical difference between the two lies in where the motor is located. In vertical turbines, the motor is above ground and connected to the impellers through a long shaft. In submersible turbine pumps, the motor is underwater at the bottom of the pump. At Service Pump & Supply, we sell, install, and service both vertical and submersible turbines.

    FVTM/FVTE is type  vertical turbine pump (sometimes called long-shaft pump) with centrifugal type impeller, volute design. FVTM/FVTE type vertical turbine pump is completely according to API 610 application and performance request designed. The FVTM/FVTE vertical turbine pump is driven by standard vertical compact motor or driven by horizontal driver (electric motor, diesel engine) by the right angle gear box. The underground column and shaft is divide into several sections, so FVTM/FVTE type vertical turbine pump is flexible to get the desired length to meet the deepth of the well. FVTM/FVTE type vertical sump pump can offer any tailor-made according to the project request.

    FVTM/FVTE struction                                                                        


    • 3D design used in the whole design process and CFD analysis and being embodied with knowledge and experience of the fluid experts in EU-Flo
    • Modular and fine hydraulic performance, high efficiency and good production quality.
    • The shaft sealing is optional for mechanical seal and soft packing.
    • The long column is divided into several flanged type sections, it is flexible to get your desired length.
    • The long shaft has several sections that is coupled together by sleeve and fixed inside sleeve bearings to ensure the coaxial.
    • Sand collar are used to stop the sand or solids.
    • Sleeve type liquid lubricated bearing has long life time.
    • Upper stood is possible to tailor-made.
    • Heavy duty service design, the shaft can absorb the huge and unstable torque.
    • Volute design ensure  axial thrust minimum




    • Advance and modular design with fine production that is supplied by EU-Flo Pump.
    • Sleeve bearings are made of fine material or supplied by famous brand, like Canada Thordon.
    • Flexible column length.
    • Supper technical team and find production to ensure the tailor-made and best quality.
    • Complete testing system to ensure the performance before delivery.
    • Many choices for material, cast iron,cast steel, all kinds of stainless steel, duplex stainless steel and steel alloy.
    • Excellent pumps with fast delivery.
    • Epoxy coated parts submerged inside the liquid.
    • Wet pit installation for lower NPSH request of condensation,
    • Heavy Duty, Double Suction option


    • Municipal water supply
    • Condensation of Power Plant
    • General Industries of Process for oil and liquids
    • Food & beverage
    • Fire- fighting
    • Fertilizers
    • Biofuels
    • Metal Smelting
    • Marine & offshore
    • Oil& Gas

    Operation Range                                                                          

    • Capacity

    up to 2500L/s (9000m3h), or as per tailor-made.

    • Head

    up to 150m(492ft), or as per taitor- made.

    • Working temperature

    up to 60°C

    • Design pressure

    1.6Mpa / 2.5Mpa

    • Nozzle

    up to 1200mm or tailor design. Flange standard can be DIN, AS,ANSI ,JIS,GOST or other standard.